High Squat Rack - Club Combo Package

Similar to the Anker 3, the Anker 7 is wall-mounted with a 1:2 weight ratio and 150, 200 or 225lb weight stack options. While the Anker 3 has four stationary attachment points, the Anker 7 includes dual adjustable swivel pulleys that have a 43.5in (3.6 ft) width between pulleys and a 103in (8.5 ft) cable travel for each handle. The Anker 7 also boasts a wider stance, with only 9 inches of clearance from a wall, and stainless-steel uprights with laser engraved numbering. It still comes with two short strap handles, two long strap handles, one leg boot, a battle rope anchor strap and hanging storage hooks to organize accessories. Use the bottom frame battle rope anchor point with nylon strap and top frame resistance band anchor point for more training options. Add on the optional pull-up (ANKER-PUA-102), phone holder, and adder pins if you are looking to purchase extra attachments. Get unbeatable, space-saving cable training and even more versatility with the Anker 7!

Included Accessories:

• Hanging storage pegs and leg boot
• Two rubber over-molded T-Grip short strap handles
• Two long strap handles
• Welded lower anchor point with nylon strap for battle ropes

Attachment Options:

• Pull-Up (ANKER-PUA-102)
• Magnetic Phone Holder (PH-MAG-101)
• Weight Stack Adder Pin (BS-SSWP-2.5)

The Torque X-GYM line of racks was designed to bring the commercial quality of our X-RACK line to your home in an affordable and customizable way. With over 15 years of customer feedback from our commercial rack line, our home rack lineup has the features and quality you need for a serious workout at home or in your garage gym at an affordable price.

With a variety of pull-up bars and attachments to choose from, you can start simple and build your way up to your dream home gym over time. When you buy one of our racks for your home, you are buying the Torque quality trusted and used by the major national gyms across the world.

The heavy base and 3 x 3 11 gauge uprights provide plenty of weight to keep the squat stand steady. Includes a pair of Bar Supports and a Single Cross Pull-Up bar. The pull-bar can be upgraded to any of our pull-up bar options. Multiple rack accessories and attachments are available that either bolt to the base of the rack, the uprights, or mount at the top.

This rack comes with 4 holes that allow users to bolt it to the floor for more stability. Bolting is not required but provides an extra level of stability.

Included in this package:

• Squat Stand Base
• (2) 7.5 Ft Uprights
• (2) Bar Supports/J-Cups that attach to the uprights
• (1) Single Cross Pull-up Bar
• Vertical Weight Storage Pair

Your home gym isn't complete without this flat-incline adjustable weight bench. With 9 back pad and 3 seat adjustment points, find your optimal performance position and set new PRs. Includes knurled handles and wheels for optimal maneuverability. Made from 11 gauge steel and high density foam, this piece will be a staple in your gym for years to come. It won't quit, ever, so you don't have to either.

This adjustable workout bench can be used with our Free-Standing F9 and can be stored vertically, allowing the doors to still close.

Features:

• Can be stored vertically with or without F9 Functional Trainer
• 9 back pad and 3 seat adjustment levels
• Includes knurled handles and wheels
• Chrome-plated steel
• 1000 lb weight capacity

Sturdy spotter arms that attach firmly to uprights to stop a falling bar from landing on the user or the ground.

Features:

• UHMW wear guards that protect the uprights and bar
• Designed for Torque X-GYM Racks
• Bar catch load rating 875lb (397kg)
• Wear Guard Length:  31 inches (787 mm)
• Sold as a pair

Available in 210lb, 350lb and 420lb sets consisting of 25lb, 35lb, and 45lb bumper plates that provide a dead bounce, and easy weight identification. The reinforced steel molded in hubs are coated with a proprietary material that forms a chemical bond with the rubber that prevents separation. Most competitors press in the hub after the rubber is molded which will over time, always lead to failure. The 25 lb – 45 lb plates are the standard IWF 450mm in diameter. These bumper plates are slightly darker than our standard colored bumper plates and may contain blemishes.
Our unique and proprietary manufacturing process allows us to produce a bumper that has both higher tensile strength and hardness than competitor plates. This is accomplished by molding with a harder rubber near the core, which prevents the hub from separating and plate wobble over time, and a softer rubber on the outside to act as a buffer deadening the blow and sound from the plate when dropped. The rubber itself is 100% virgin and passes REACH and Rohs standards with a weight tolerance of /-0.5%.

210LB SET:

• (2) Blue 45LB Plates
• (2) Yellow 35LB Plates
• (2) Green 25LB Plates

350LB SET:

• (4) Blue 45LB Plates
• (2) Yellow 35LB Plates
• (4) Green 25LB Plates

420LB SET:

• (4) Blue 45LB Plates
• (4) Yellow 35LB Plates
• (4) Green 25LB Plates

A solid Olympic Bar is a fundamental tool for home gym training and our all-new X-GYM 7 Foot Olympic Bar was designed with home workouts in mind. This bar is perfect for performing traditional strength and cross training movements like squat, bench press, and more.

Although heavy-duty, this bar is designed to be paired with Grip Plates and is not meant to be dropped. Our bar comes in around 44 lbs or 20 kgs, has dual knurl marks to help keep your hand positioning consistent, and a weight capacity of 700 lbs. With all of the features you need and at a competitive price point, this is the perfect bar to help you PR at home. 

• 7 Foot, 30 MM Olympic Bar
• Weight capacity of 700 lbs
• Dual knurl
• No Center Knurl 
• 44 lbs / 20 kg
• Do not drop

Perform additional exercises with your Anker 3 or Anker 7 by adding on the Anker Pull-Up Attachment. Featuring a debossed diamond pattern, this bar offers a comfortable grip surface when performing various exercises. With both straight and angled sections for added use options, this attachment allows you to target different muscle groups and get the most out of your home gym.

*Compatible with both Anker models

J-Cup Bar Supports that attach to uprights on all Torque Squat Stands, Racks, and Cages.  Most lifting racks include a set of these, but you can purchase them here too.

Features: 

• Aluminum spring pins prevent them from getting knocked off
• Load rating 875lb (397kg)
• UHMW wear guards protect uprights and Olympic Bar
• Sold as a pair

These collars are designed with a clamping force strong enough to keep weight plates secured during the highest impact Olympic, cross training and bumper plate workouts.

Features:

• Built from a proprietary nylon resin
• A larger lever and spring loaded snap latch for easy attachment and removal.
• Elastomer pads and resin frame protect the bar and plates from damage
• Weight 1 lb. per set of two
• Recommended for Torque’s X-SERIES bars
• Sold in pairs

Torque Fitness is an Authorized Lock-Jaw Collar Dealer

Designed for Torque High Squat Racks, the Single Cross is the preferred pull-up bar for all pull-ups and muscle-ups.

Features:

• 1.25 in. diameter with “thru-plate” construction with gussets
• Proprietary storm grey wrinkle textured paint is powder-coated to 5 mil thickness (2.5 X the industry standard) for a superior grip and longer-lasting durability